PREMIER PRODUCTS PUBLIC COMPANY LIMITEDSET: PPP🇹🇭 TH

Sustainability · 2024

In this section52 topics

Sustainability Policy

Has a Sustainability Policy

Yes

Policy Description

3.1.1 Bringing business expertise to resolve social issues

Environmental problems and degradation of natural resources are a result of careless consumption without a true recognition of their values. Coupled with the lack of proper resource management especially with regard to water and energy, the two key resources vital for life, several countries around the world are facing the problem of water security resulting from unsatiable needs of their urban communities, industrial sectors including industrial estates and special economic zones, and the expanding service sector in big cities and the tourism sector. As a result, the demand for water becomes an increased economic cost.

Premier Products Public Company Limited and its subsidiary are dedicated to leveraging expertise, integrating innovation, and utilizing diverse technologies to provide water and clean energy management services. The Company specializes in the production and distribution of environmentally friendly construction materials, guided by the philosophy of "Creating Sustainable Quality of Life and Environment" Its mission is to improve consumer quality of life while upholding social and environmental responsibility. By applying business expertise to address societal challenges and sustainably enhance living standards, the Company follows the principle of Harmonious Alignment of Success. This is underpinned by five core values: creativity, knowledge integration, employee collaboration, external partnerships, and the continuous development of quality processes, services, and products to solve problems and benefit society and the environment. Operating with integrity, ethics, honesty, fairness, and transparency, the Company strives to achieve long-term mutual benefits for the business, its employees, and society.

The Company's approach to sustainable business development focuses on creating value for all stakeholders through three key components: (1) System Integration, achieved through collaboration with stakeholders at every stage, from design and development to implementation, ensuring seamless integration; (2) Requirement Gathering, aimed at gaining a deep understanding of user needs, identifying core issues, and developing systems or products that address the needs of customers and partners; and (3) Joint Goal Setting, which involves designing and developing systems or products with consideration to social and environmental impacts, driven by continuous innovation, technology development, and community engagement, to improve quality of life while upholding social and environmental responsibility.

In 2024, the Company introduced an innovative environmental solution: the PLUG & GO water treatment system, designed specifically for use in older buildings. This system can be seamlessly integrated with existing water treatment systems to enhance their efficiency while minimizing construction and budget challenges. It ensures that wastewater meets required standards before being discharged into public waterways, thereby safeguarding the broader community environment.

An important focus for the Company is community development around its operational sites in Na Di District, Prachinburi. This includes improving quality of life, developing water treatment systems, and promoting clean energy through active community engagement and a deep understanding of local needs. For example, the “Solar-Powered Community Water Supply Project” enhanced the community’s water supply system and installed solar panels to ensure sustainability, serving as a model for other areas. The “Water Tank Improvement for Khao Yai National Park Protection Unit” in Na Di District provided reliable access to clean water for both tourists and park staff. Additionally, the “Community Engagement to Support Na Di Hospital, Prachinburi” initiative supplied essential items to help alleviate the financial burden of patients, particularly bedridden and elderly individuals, ultimately improving the overall quality of life in the community.

These initiatives not only support community development but also empower employees to apply their professional expertise to benefit society, foster a spirit of collaboration, and encourage active citizenship, contributing to a harmonious and prosperous community. 3.1.2 Collaboration for Good Society

With the vast, diverse, and complex social issues prevalent today, simply leveraging expertise from business operations to create sustainability is insufficient to generate significant positive impact or large-scale societal change. It is necessary to encourage, extend, and support collaborations with organizations dedicated to social development causes to effectively address these problems and yield substantial results for society.

Premier Products Public Company Limited has continuously integrated social development principles into a business. The Company (1) utilizes knowledge, expertise, resources, and capabilities to address social issues through business operations. This includes (2) extending cooperation and enhancing the value chain with partners and customers with the commitment to alleviate social problems and create broader positive impacts, and (3) allocating 5% of net profits to support sustainable social development initiatives within the Premier Group of Companies through the Collaborration for Good Society project. This public-benefit platform serves as a tool to amplify social efforts that lead to “equity” and “sustainability”, fostering collaboration with various social projects that address issues in various areas such as children and youth, environmental conservation, public health, and anti-corruption. This approach aims to broaden participation and drive large-scale systemic change beyond what an individual organization can achieve.

3.1.3 Employees: Key to the Drive for Sustainable Success

The Company is well aware that employees play a crucial role in achieving sustainable collective success. They are the ones utilizing their expertise to address social issues and contribute to creating a sustainable society environmentally and socially, with good governance. The Company therefore focuses on instilling social conscience and responsibility into employees by encouraging the use of core values to an extent that they become inherent traits of the Premier Company Group’s personnel.

The Company provides opportunities for employees to participate in social development efforts by collaborating with various foundations, projects, and cooperative organizations on a wide range of social issues. These include improving the quality of life for children and youth, enhancing educational standards, addressing child malnutrition, environmental conservation, and sustainable social participation mechanisms. The goal is to help employees understand social issues and recognize their own potential and efforts in creating a better society.

Sustainability Goals & UN SDGs

Has Sustainability Goals

Yes

Goals Description

Issues that are important to sustainable development

The Company continues to focus on issues that are important to sustainable development (as shown in the diagram in the upper right corner) from the business chain and stakeholders to make them a part of sustainable development by adopting the Sustainable Development Goals (SDGs) of the United Nations as a framework for sustainable development.

From the above important issues for sustainable development, the Company has used such issues to set target plans that can be divided into main issues, namely, business, employees and society, as shown in the diagram below and more details can be found on the Company's website.

UN Sustainable Development Goals

SDG Goal
Goal 5 Gender Equality
Goal 6 Clean Water and Sanitation
Goal 7 Affordable and Clean Energy
Goal 9 Industry, Innovation and Infrastructure
Goal 13 Climate Action
Goal 17 Partnerships for the Goals

Policy Review

Policy Reviewed This Year

No

Policy Changed This Year

No

Business Value Chain

Value Chain Description

The business value chain follows the concept of "Creating a sustainable quality of life and environment" that starts from the beginning to the downstream through the process of developing products that meet the highest needs for the lives of people in society, along with environmental conservation by taking into account the stakeholders in the activities involved at each step of the chain in delivering good value, as shown in the business value chain diagram below.

Stakeholder Analysis

Introduction

The Company has identified the stakeholders throughout the business chain considering the significant relevance to business operations such as influence, relationship and responsibilities, which generate both positive and negative impacts, to be used to analyze expectations, guidelines for creating engagement and communication. The stakeholders are divided into 7 groups including customers, shareholders, employees / executives, community / society, trading partners, government sector and competitors. The details in order of importance can be described as follows.

Based on the analysis of expectations, guidelines for building engagement and communication with stakeholder groups in the business chain, the Company has currently implemented measures are as follows:

Stakeholder Analysis

Stakeholder TypeStakeholdersStakeholder ExpectationsResponse to ExpectationsCommunication Activities
External stakeholders2923 · Description: Customers
• Quality products and services to satisfy the customers • Responding to customer needs • Complying with consumer protection laws and product responsibilities
• Satisfaction with products and services > 80 percent • No complaint from the handover process • No complaint about the consumer protection law
2941 · Description: Online Communication · 2945 · Description: Complaint Reception · 2947 · Description: Satisfaction Survey
External stakeholders2913 · Description: Shareholders
• Financial performance and return on investment • Business stability and growth • Good corporate governance • Risk Management
• Building the confidence in investment • Performance and sustainability • Transparent disclosure of information • Risk management plan
2938 · Description: Visit · 2939 · Description: Press Release · 2941 · Description: Online Communication · 2942 · Description: Internal Meeting · 2944 · Description: Annual General Meeting (AGM) · 2945 · Description: Complaint Reception
Internal stakeholders2921 · Description: Employees
• Equal and fair remunerations and welfares • Safety at work • Appropriate development of potential and competence
• Suitable process of remuneration and welfare allocation. • Process of improvement and risk reduction • Appropriate human resource development
2941 · Description: Online Communication · 2942 · Description: Internal Meeting · 2945 · Description: Complaint Reception · 2946 · Description: Employee Engagement Survey · 2948 · Description: Training / Seminar
External stakeholders2902 · Description: Community
• Business operation with good governance principles to pay attention to the environmental, health, and safety impacts • Enhancement on the quality of life to promote the preservation of local traditions and culture.
• Prevention on various business operation problems for not incurring any complaints • Supporting and promoting community development around the workplace
2938 · Description: Visit · 2940 · Description: Social Event · 2941 · Description: Online Communication · 2942 · Description: Internal Meeting · 2945 · Description: Complaint Reception
External stakeholders2899 · Description: Suppliers
• Fair, transparent and verifiable agreements • Fair returns • Payments as agreed in the commitment
• Strict compliance with the agreed commitment • Free from corruption or claiming benefits from the procurement • Quality and services as agreed
2938 · Description: Visit · 2941 · Description: Online Communication · 2942 · Description: Internal Meeting · 2945 · Description: Complaint Reception
External stakeholders2931 · Description: Government agencies and Regulators
• Compliance with law and regulations of government agencies • Participation in network activities
• Compliance with regulations of government agencies in related matters • Cooperation with government agencies
2938 · Description: Visit · 2941 · Description: Online Communication · 2943 · Description: External Meeting · 2945 · Description: Complaint Reception · 2948 · Description: Training / Seminar
External stakeholders2898 · Description: Competitors
• Fair competition without violating intellectual property
• Transparent operating without violating the rights
2945 · Description: Complaint Reception

Environmental Sustainability — Overview

Operating Results — Introduction

In order to achieve its environmental, occupational health, safety and working environment policies, the Company appointed an environmental working group to review and assess risks, determine objectives, set indicators, formulate plans and set annual budgets according to the guidelines of ISO-14001 international standard. Operations in 2024 were as follows:

Environmental Policy & Guidelines

Has an Environmental Policy

Yes

Policy Description

Premier Products Public Company Limited is committed to prevention and protection of environmental biodiversity, including to prevent injury, illness, death of employees, customers and stakeholders. The Company therefore sets the policies and guidelines for the operation as follows:

1) The management systems on the environment, occupational health, safety, and environment in working are parts of business operation to support the Company’s strategies, visions, and mission.

2) The Company continuously develops, improves, protects the environment, prevents pollution and biodiversity, injuries, illnesses, deaths of employees, customers, suppliers, subcontractors and stakeholders.

3) The Company promotes, encourages, and communicates to the parties involved in the process from upstream to downstream to have responsibilities for the implementation of standards, regulations, and laws on environment, occupational health, safety and working environment by setting the objectives, goals, and plans for continuous improvement.

4) The Company will promote and support appropriate and adequate personnel, resources, time, budget, and training.

5) The Company places importance on biodiversity by avoiding and minimizing the impact on biodiversity in its business chain.

6) The Company will monitor and inspect to ensure that there is a process to reduce risks or create opportunities for the business in accordance with its strategy.

Environmental Guidelines

Guideline
Electricity Management
Fuel Management
Renewable/Clean Energy Management
Water Management
Waste Management
Biodiversity Management
Greenhouse Gas and Climate Change Management
Air Quality Management
Noise Pollution Management

Environmental Policy Review

Policy Reviewed This Year

Yes

Energy — Plan & Guidelines

Has an Energy Management Plan

Yes

Plan Description

Energy Conservation Policy

The Company is committed to conserving energy generated by direct combustion activities, the use of external energy and other activities of external stakeholders, so as to effectively use energy and continuously reduce the emission and absorption of greenhouse gases. Therefore, the Company has established the energy conservation policy as follows:

1) Develop an appropriate energy management system as part of the Company's operations in accordance with relevant laws and other regulations.

2) Continuously improve the efficiency of the organization’s energy resource utilization in accordance with the industry, installed technologies and best practices.

3) Set energy conservation goals each year, including procurement of energy-saving products or services, and communicate to all employees to understand and practice accordingly.

4) Energy conservation is the duty and responsibility of executives and employees of the Company at all levels to cooperate in complying with the specified measures, monitoring and reporting to the energy management working group.

5) Provision of necessary support means human resources, budgets, information and other related resources, such as working hours, training and participation in presenting ideas for energy development.

6) Set target for continuous greenhouse gas emission reduction.

7) Monitor, verify, evaluate performance, review and improve energy policies and practices to ensure continuous improvement. This energy policy has been disseminated and documented and communicated to employees at all levels for their acknowledgment and understanding, as well as encouraged participation through working groups or other channels for implementation and maintenance of this policy.

Energy — Electricity Consumption

Electricity Consumption

MetricCurrent YearPrevious YearTwo Years Ago
Total electricity consumption within the organization (Kilowatt-Hours)1,375,3901,511,3331,484,601
Electricity purchased for consumption from non-renewable energy sources (Kilowatt-Hours)944,2201,199,4081,198,514
Electricity purchased or generated for consumption from renewable energy sources (Kilowatt-Hours)431,170311,925286,087

Energy — Fuel Consumption

Fuel Consumption

MetricCurrent YearPrevious YearTwo Years Ago
Crude oil (Barrels)000
Coal (Metric tonnes)000
Jet fuel (Litres)000
Diesel (Litres)132,709117,045.9132,845.64
Gasoline (Litres)144,754123,782.8132,693.86
Fuel oil (Litres)000
Natural gas (Standard cubic feet)000
LPG (Kilograms)21,16013,98018,048
Steam (Metric tonnes)000

Energy — Targets

Has Set Targets

Yes

Targets

TargetBase YearBase Year ValueTarget YearTarget Year ValueTarget Change (%)Unit
Reduction of electricity purchased for consumption2,0231,199,4082,0241,175,419.842Kilowatt-hour
Increase of electricity consumption from renewable energy sources2,023311,9252,024321,282.753Kilowatt-hour

Energy — Performance & Outcomes

Has Performance Results

Yes

Performance Description

• The Company established a target to reduce electricity consumption (kWh per Direct Materials (kg)) by more than 2 percent compared to the previous year. In 2024, electricity usage decreased by 255,188 kWh, or 2.99 percent (kWh per DM), successfully meeting the target. This reduction was achieved through various energy-saving initiatives, including regular maintenance of electrical equipment, transitioning to energy-efficient lighting systems, servicing air compressors, and replacing air compressors in mid-2024 to enhance their efficiency and energy performance.

• The Company established an Energy Conservation Working Group and appointed an Energy Manager (EM) to oversee energy conservation efforts in line with the Ministry of Energy's regulations on energy management for controlled factories and buildings (B.E. 2552). In 2024, the Company set a target to reduce Specific Energy Consumption (SEC) by at least 5 percent from the 2023 level of 0.71 kWh/kg, resulting in the 2024 target being 0.67 kWh/kg. The actual energy conservation performance for 2024 was an SEC of 0.60 kWh/kg, a 15 percent reduction compared to 2023.

• The Company generates electricity from solar energy. In 2024, the Company set a target to reduce external electricity purchases by 3 percent compared to the previous year, with external purchases not exceeding 1,139,438 kilowatts. In 2024, external electricity purchases totaled 944,220 kilowatts, successfully meeting the target. This reduction was achieved by improving the efficiency of solar power generation through the replacement of solar panels in the previous year. The total electricity generated amounted to 431,170 kilowatts, valued at 2,099,797 Baht, resulting in a calculated reduction of 279.82 tons of greenhouse gas emissions.

Water — Plan & Guidelines

Has a Water Management Plan

Yes

Plan Description

The Company set a target to reduce internal water consumption by 3 percent compared to the previous year, aiming to keep total usage below 11,143 cubic meters.

Water — Withdrawal, Discharge & Consumption

Consumption — Introduction

The Company's water consumption is the total amount of tap water used, including the amount of recycled water.

Water Withdrawal, Discharge & Consumption

MetricCurrent YearPrevious YearTwo Years Ago
Total water withdrawal (Cubic meters)15,99213,21712,093
Total water withdrawal by third-party water (Cubic meters)15,99213,21712,093
Total water withdrawal by surface water (Cubic meters)000
Total water withdrawal by groundwater (Cubic meters)000
Total water withdrawal by seawater (Cubic meters)000
Total water withdrawal by produced water (Cubic meters)000
Percentage of wastewater treated before discharge (%)100100100
Total water discharge (Cubic meters)7,9606,6095,624
Total water discharge to third-party water (Cubic meters)7,9606,6095,624
Total water discharge to surface water (Cubic meters)000
Total water discharge to groundwater (Cubic meters)000
Total water discharge to seawater (Cubic meters)000
Total water consumption (Cubic meters)19,05716,05516,143
Recycled water (Cubic meters)3,0652,8384,050

Water — Targets

Has Set Targets

Yes

Targets

TargetBase YearBase Year ValueTarget YearTarget Year ValueTarget Change (%)
Reduction of water withdrawal2,02313,2172,02411,1433

Water — Performance & Outcomes

Has Performance Results

Yes

Performance Description

In 2024, total water consumption reached 15,992 cubic meters, an increase from the previous year. This increase was due to additional large fiberglass water tank inspections, which exceeded the storage tank’s capacity for circulating water during testing. As a result, the water could not be reused in time for the testing cycle, preventing the Company from meeting its target. Despite this, the Company remains committed to the 3R water management practices—Reduce, Reuse, and Recycle. Efforts include evaluating the necessity of water use for each activity, reusing water from tank testing processes, and expanding recycling initiatives. In 2024, a total of 3,065 cubic meters of water were recycled, leading to cost savings of 59,767 Baht.

Waste — Plan & Guidelines

Has a Waste Management Plan

Yes

Plan Description

For sustainable environmental management, The Company places importance on reducing the amount of industrial waste from the source and promotes the reuse of industrial waste so as to reduce the amount of industrial waste sent for external disposal. The goals were set as follows:

Waste — Generation, Disposal & Recycling

Waste Generation, Disposal & Recycling

MetricCurrent YearPrevious YearTwo Years Ago
Total waste generated (Kilograms)190,950144,500108,780
Non-hazardous waste (Kilograms)133,160116,84077,910
Non-hazardous waste - Landfilling (Kilograms)
Non-hazardous waste - Incineration (with energy recovery) (Kilograms)
Non-hazardous waste - Incineration (without energy recovery) (Kilograms)
Non-hazardous waste - Other disposal operations (Kilograms)
Hazardous waste (Kilograms)57,79027,66030,870
Hazardous waste - Landfilling (Kilograms)
Hazardous waste - Incineration (with energy recovery) (Kilograms)
Hazardous waste - Incineration (without energy recovery) (Kilograms)
Hazardous waste - Other disposal operations (Kilograms)
Total reused/recycled waste (Kilograms)7,9272,25919,170
Reused/Recycled non-hazardous waste (Kilograms)7,9272,25919,170
Reused non-hazardous waste (Kilograms)
Recycled non-hazardous waste (Kilograms)
Reused/Recycled hazardous waste (Kilograms)000
Reused hazardous waste (Kilograms)000
Recycled hazardous waste (Kilograms)000

Waste — Targets

Has Set Targets

Yes

Targets

Waste TypeDisposal ApproachTargetBase YearBase Year ValueTarget YearTarget Year ValueTarget Change (%)
Non-hazardous waste2758 · Description: Reuse · 2759 · Description: Recycle · 2763 · Other name: Reduce the amount of waste from its source · Description: OtherReduce waste volume2,023116,8402,024112,166.44
Hazardous waste2763 · Other name: Reduce the amount of waste from its source and proper separation of hazardous waste · Description: OtherReduce waste volume2,02327,6602,02427,106.82

Waste — Performance & Outcomes

Has Performance Results

Yes

Performance Description

• Fiberglass Scrap: The goal was to reduce fiberglass waste from production activities to less than 4 percent of Direct Materials (DM), or a maximum of 107.6 tons. In 2024, fiberglass scrap totaled 133.16 tons, or 4.95 percent. However, The Company remains committed to implementing measures that minimize fiberglass scrap at its source to achieve a reduction compared to the previous year. Any remaining fiberglass scrap will be used for experimental purposes to maximize reuse.

• Contaminated Waste: The Company aimed to reduce contaminated waste from production activities to below 2 percent of Direct Materials (DM) or a maximum of 56.45 tons.

GHG — Plan & Guidelines

Has a GHG Management Plan

Yes

Plan Description

In 2024, the Company set a target to reduce Scope 1 and Scope 2 greenhouse gas emissions and removals by at least 2 percent from the base year, relative to Direct Materials (DM), which equates to a reduction of at least 24.66 tonnes of CO2e (based on the 2021 baseline, where combined Scope 1 and Scope 2 emissions totaled 1,284 tonnes of CO2e). To achieve the five-year goal, emissions must be reduced by at least 10 percent from the base year by 2028, representing a cumulative reduction of 118.48 tonnes of CO2e. If this trajectory continues, by 2033, Scope 1 and Scope 2 emissions will have decreased by at least 225.58 tonnes of CO2e. Scope 3 emissions, which encompass indirect greenhouse gas emissions and removals beyond those covered in Scope 1 and Scope 2, are not included in the reduction target, as they fall outside the Company’s direct control.

GHG — Emissions

GHG Emissions

MetricPrevious YearTwo Years Ago
Total GHG emissions (Metric tonnes of carbon dioxide equivalent)4,4895,713
Total greenhouse gas emissions 1 (Metric tonnes of carbon dioxide equivalent)699779
Total greenhouse gas emissions 2 (Metric tonnes of carbon dioxide equivalent)709714
Total greenhouse gas emissions 3 (Metric tonnes of carbon dioxide equivalent)3,0814,220

GHG — Emissions Verification

Emissions Verified by a Third Party

Yes

Verifying Body

2656

Verifying Body — Please Specify

SGS (Thailand) Co., Ltd

GHG — Principles & Standards

Principles & Standards Applied

Standard
2671

GHG — Targets

Has Set GHG Targets

Yes

GHG Targets — Other Targets

Other GHG Targets

Emission ScopeBase YearBase Year EmissionsNear-term Target YearNear-term Target ValueNear-term Target Change (%)Long-term Target YearLong-term Target ValueLong-term Target Change (%)Target YearTarget Year EmissionsTarget Change (%)
27152,0211,2842,0241,259.3422,028225.58102,0241,259.342

GHG — Performance & Outcomes

Has Performance Results

Yes

Performance Description

In 2024, greenhouse gas emissions and removals were audited by SGS (Thailand) Limited, and the Company is currently in the process of submitting an application for TGO Guidance of the Carbon Footprint for Organization certification from the Thailand Greenhouse Gas Management Organization (Public Organization) for the fourth consecutive year. The Company will disclose this information on its website.

Environmental Legal Incidents

Legal Violation Incidents

MetricCurrent YearPrevious YearTwo Years Ago
Number of cases or incidents of legal violations or negative environmental impact (cases)000

Other Environmental Management

Plan Description

• Total Dust: The Company set a target to reduce total dust emissions from production processes, with the goal being a maximum allowable concentration of 2.5 mg/m3. The regulatory standard is less than 15 mg/m3 set by the Department of Labor Protection and Welfare. The highest recorded total dust level across all production facilities was 0.565 mg/m3, successfully meeting the target. This achievement resulted from dust collection measures at the source, designated areas for dust-generating activities, and the continuous use of vacuum trucks to remove accumulated dust from floors.

• Respirable Dust: The Company set a target to reduce respirable dust from production processes to a maximum of 0.5 mg/m3, well below the regulatory standard of 5 mg/m3 set by the Department of Labour Protection and Welfare. The highest recorded respirable dust level was 0.285 mg/m3, successfully meeting the target. This was achieved through dust collection measures at the source, designated areas for dust-generating activities, and the continuous use of vacuum systems to remove accumulated dust from floors.

• PM 2.5 Dust (Particulate Matter): The Company set a target to reduce PM2.5 dust levels to no more than 20 micrograms per cubic meter (ug/m3), while the national ambient air quality standard, as announced by the National Environment Board, allows up to 50 ug/m3 over a 24-hour average. Measurements from the dust meter in the production area recorded a PM2.5 level of 19 ug/m3, successfully meeting the target. This achievement was attributed to the transition from fuel-powered to electric forklifts, which helped reduce emissions.

• Internal PM10 Dust (Particulate Matter): The target was to reduce PM10 dust levels to no more than 20 micrograms per cubic meter (ug/m3), while the standard limit, as set by the National Environment Board’s announcement on ambient air quality, is 120 micrograms per cubic meter (ug/m3) over a 24-hour average. Measurements from the dust meter in the production area recorded 21 micrograms per cubic meter (ug/m3), exceeding the target. The Company continues to implement dust suppression measures at the source during production, including isolating areas where dust is generated, minimizing dispersion, and routinely vacuuming accumulated dust from floors.

• External PM10 Dust (Particulate Matter): The target was to reduce PM10 dust levels outside the factory walls to no more than 0.04 milligrams per cubic meter (mg/m3), while the regulatory standard for dust outside the factory fence, as set by the National Environment Board’s announcement on ambient air quality, is 0.12 milligrams per cubic meter (mg/m3). The recorded measurement was 0.073 mg/m3, remaining within the target. This achievement resulted from effective dust suppression measures, including controlling dust at the source during production, isolating areas where dust was generated, and continuously vacuuming accumulated dust from floors to minimize dispersion.

• Workplace Noise Level: The goal was to maintain noise levels below 84 dB(A), while the regulatory standard set by the Department of Labour Protection and Welfare allows a maximum of 85 dB(A) for employees throughout the workday. The highest recorded workplace noise level was 81 dB(A), remaining within the target.

• Styrene Level: The target was to reduce workplace styrene levels to no more than 0.02 ppm (parts per million), while the regulatory limit set by the Department of Labour Protection and Welfare for hazardous chemical concentrations is 100 ppm. The measured workplace styrene level was 0.01 ppm, achieved through measures such as controlling odors at the source, improving odor capture systems, and enhancing odor treatment efficiency.

• Air quality from factory ventilation stacks (The total suspended particulate (TSP)): The target was to remain below 6 milligrams per cubic meter (mg/m3). The standard regulatory limit is 400 mg/m3 set by the Ministry of Industry’s Notification on the Determination of Air Contaminant Limits Emitted from Factories. Measurements from all ventilation stacks confirmed a maximum recorded value of 6 mg/m3, meeting the target.

Social Policy & Guidelines

Has a Social Policy

Yes

Policy Description

The Company adheres to Thai labor standards to enhance the quality of life and working conditions for employees, suppliers, contractors, subcontractors, and partners, with respect for human rights and fair labor practices. The Company has established a policy of social responsibility towards employees and trade partners as follows:

1. Social responsibility management system on employees and trade partners that is part of the business operations and is the responsibility of all employees at all levels, suppliers, sub-contractors and contractors who work for the Company to participate in the expression of opinions and jointly act to ensure that labour operations are carried out in accordance with the established policy.

2. The Company shall not commit or support the use of any form of forced labour, including not collecting any security deposits or any employee identification documents unless required by law.

3. The Company shall pay wages, remuneration and rest time in accordance with the law and shall not deduct or reduce wages for disciplinary purposes, including not using physical and mental punishment or coercive actions to harm employees. Measures are also established to prevent employees and children from sexual abuse and violence.

4. The Company treats employees, customers, trade partners, suppliers and sub-contractors equitably and does not commit or support any hindrance, obstruction, interference and discrimination on grounds of nationality, race, religion, language, age, gender, marital status, disability, union membership, political preferences, HIV patients, drug patients, and personal ideas.

5. The Company respects the employees' right of association in order to gather and establish, including joining as a member, an employee organization and shall not take any action that will obstruct or interfere with the exercise of employees' rights in such matters.

6. The Company shall not employ or encourage the employment of children under the age of 15. It shall provide pregnant women with safe work that does not harm their pregnancy and shall not terminate their employment, demote them or reduce their benefits.

7. The Company complies with the laws, Thai labour standards, safety standards and international declarations such as human rights and the treatment of HIV/AIDS patients according to the requirements of the United Nations, including relevant conventions.

8. The Company contributes resources, such as personnel, time, budget, training, and promotion of campaigns on prevention of problems on drugs, HIV, AIDS and tuberculosis and activities that promotes non-division or discrimination against HIV and drug abuse patients.

9. The Company provides a designated area where breastfeeding employees can express milk at any time while receiving their regular pay. Additionally, the Company ensures that breastfeeding employees work in a safe, non-hazardous environment and are protected from termination, demotion, or benefit reductions due to pregnancy.

10. The Company promotes two-way communication and encourages employee participation in its operations through various working groups and small group activities, fostering the joint enhancement of quality of life and work (Quality of Work Life & Quality of Work). Additionally, the Company supports financial well-being by facilitating participation in the Premier Group’s provident fund and saving and credit cooperative.

Policy Document Link

https://www.premier-products.co.th/environmental-policy/

Social Guidelines

Guideline
Employee Rights
Migrant Workers
Child Labor
Consumer Rights
Community and Environment Rights
Safety and Occupational Health at Work
Non-discrimination
Business Partner Rights

Social Policy Review

Policy Reviewed This Year

No

Social — Principles & Standards Practised

Principles & Standards Practised

Standard
Thai Labour Standard: Corporate Social Responsibility of Thai Businesses (TLS 8001-2010) by the Ministry of Labour

Human Rights Due Diligence

Conducts Human Rights Due Diligence

Yes

Due Diligence Description

• The Company conducts an annual evaluation of the labor practices of its trade partners, suppliers, and subcontractors through the procurement process. As part of this assessment, trade partners are required to submit a letter of commitment to ethical labor practices, which includes the prohibition of child labor and forced labor, prevention of human trafficking, prohibition of illegal foreign labor, fair wage payment, compliance with legal working hours, non-discrimination, fair disciplinary and penalty procedures, legal employment of female workers, freedom of association and collective bargaining, workplace safety, and equal rights in the recruitment process. The measure ensures that all trade partners, suppliers, and subcontractors uphold ethical labor standards in accordance with the Thai Labour Standard (TLS 8001), which the Company regularly audits and certifies. In 2024, no labor-related issues were reported.

• The Company conducts audits in compliance with the ISO 45001 Occupational Health and Safety Management System to ensure continuous improvement in workplace safety for employees, as well as for contractors, trade partners, and customers who may be exposed to risks associated with the Company’s operations. In 2024, no injuries or harm to contractors, trade partners, or customers were reported as a result of the Company’s activities. Additional safety information is available on the Company’s website.

• Employee representatives regularly attend meetings on related topics with various working groups such as club committees, Thai labor standards working groups, and safety committees. The aim is to propose recommendations and suggestions to employer representatives and management, where annual budget adjustment, improvement, or allocation may need to be considered each year.

• The company has always had a good management and practice system to take care of employees in terms of welfare and labor relations. The Ministry of Labor has awarded the Outstanding Workplace in Labor Relations and Labor Welfare at the national level to the company for the 7th consecutive year, with employee and company representatives attending to receive the award.

Employees — Plan & Guidelines

Has an Employee Management Plan

Yes

Plan Description

• The Company has established fair and appropriate performance evaluation criteria for employee compensation, ensuring that assessments are based on job performance in alignment with the Company’s core value competencies. Job Grades are used to evaluate employee capabilities (Personal Grade) and support career development. The Company sets career growth targets and adjusts compensation based on both individual performance and overall company performance. Evaluation criteria and weightings include Managerial Competencies, Functional Competencies, and the achievement of set goals.

• The company has set a target for employee development training of an average of 12 hours of training per person. In 2024, the Company provided a total of 163 employee training courses with each employee receiving 12.29 hours of training per person. There were an average training expenditure of 3,256.59 baht per person and 112.48 percent of all employees received training.

• The Company encourages employees to propose ideas for various activities, both internally and externally, either through employee representatives or employee club committees. This aims to create a sense of the Company being a second home for employees according to the 8 Happy Workplace guidelines. For consideration of details about 8 Happy Workplace activities are on the Company's website.

• The Company prioritizes fair treatment and human rights for employees, customers, trade partners, suppliers, and subcontractors, maintaining these principles as an ongoing practice. In 2024, the Company was awarded a certificate of eonor and emblem from the Department of Labour Protection and Welfare, recognizing its commitment to Good Labour Practices (GLP). This certification reflects the Company’s efforts to enhance the quality of working life and prevent labor rights violations and human trafficking in labor-intensive processes.

• The Company continuously monitors and verifies human rights compliance for employees, trade partners, and communities, focusing on labor risk management in accordance with the Thai Labour Standard. This includes internal and external audits, trade partner assessments through procurement processes, and risk impact assessments for potential or emerging issues. The Company integrates Thai Labour Standard compliance into its operations and communicates social responsibility policies to employees and trade partners through various channels to ensure stakeholder awareness. Additionally, the Company regularly reports its performance to management representatives and the labor working group and develops a Thai Labour Standard manual along with procedures such as audit processes and impact mitigation/remediation measures. In 2024, there were no complaints regarding human rights violations.


Plan Areas

Plan Area
Fair employee compensation
Employee training and development
Promoting employee relations and participation
Migrant/foreign labor
Child labor
Occupational health and safety in workplace

Employees — Workforce

Workforce Data

MetricCurrent YearPrevious YearTwo Years Ago
Total number of employees (Persons)406447463
Number of male employees (Persons)236261278
Number of female employees (Persons)170186185
Total employment of disabled persons (people)677
Total disabled employees (people)677
Total male disabled employees (people)566
Total female disabled employees (people)111
Total disabled workers who are non-employee (people)000
Contributions to the fund for promoting and improving the quality of life for disabled persons000
Total number of male employees in operational level (Persons)
Total number of male employees in management level (Persons)
Total number of male employees in executive level (Persons)
Total number of female employees in operational level (Persons)
Total number of female employees in management level (Persons)
Total number of female employees in executive level (Persons)

Employees — Remuneration & Provident Fund

Remuneration & Provident Fund

MetricCurrent YearPrevious YearTwo Years Ago
Total disabled employees (people)212,567,885221,266,606222,857,649
Total male employee remuneration (Baht)123,561,628129,195,938152,523,775
Total female employee remuneration (Baht)89,006,25792,070,66870,333,874
Total number of employees joining employee provident fund (Persons)205236244
Percentage of total number of employees joining employee provident fund to total number of employees (%)50.4952.852.7
Total amount of provident fund contributed by the Company (Baht)6,389,526.947,192,1667,516,543

Employees — Training & Development

Training Data

MetricCurrent YearPrevious YearTwo Years Ago
Average employee training hours (Hours / Person / Year)12.2915.477.26
Employee development and training expenses (baht)1,275,498.06631,679.97526,972.21

Employees — Occupational Health & Safety

Occupational Health & Safety Data

MetricCurrent YearPrevious YearTwo Years Ago
Total number of lost time injury incidents by employees (Cases)213

Employees — Labour Relations

Labour Relations Data

MetricCurrent YearPrevious YearTwo Years AgoRemark
Total voluntary resignations (Persons)416476
Male employees who voluntary resigned (Persons)254548
Female employees who voluntary resigned (Persons)161928
Percentage of employee turnover leaving the Company voluntarily (%)10.114.3216.41
Evaluation result of employee engagement010Evaluate every 2 years, with an evaluation due in 2025.

Employees — Employee Representation

Employees Are Represented Collectively

Yes

Forms of Representation

FormOther — Please Specify
Welfare committee
Employee committee
OthersOccupational Safety, Health and Working Environment Committee

Employees — Targets

Has Set Employee Targets

Yes

Targets

IndicatorTarget AreasBase YearBase Year — DescriptionTarget YearTarget Year — Description
Employee Development Training Target Average training hours: 12 hours per person2984 · Description: Employee training and development2,024
Training hours: 12 hours per person
2,024
Training hours: 12 hours per person
Fair and appropriate compensation for employees2983 · Description: Fair employee compensation2,024
Employees pass the assessment according to the criteria 100 percent
2,024
Employees pass the assessment according to the criteria 100 percent
Accidents decreased2988 · Description: Safety and occupational health at work2,024
- Accidents causing work stoppage are 0 cases. - Injury Frequency rate: I.F.R. not exceeding 2.5 cases per 1,000,000 working hours - Injury Frequency rate: I.F.R. not exceeding 2.5 cases per 1,000,000 working hours
2,024
- Accidents causing work stoppage are 0 cases. - Injury Frequency rate: I.F.R. not exceeding 2.5 cases per 1,000,000 working hours - Injury Frequency rate: I.F.R. not exceeding 2.5 cases per 1,000,000 working hours
Fair treatment of labour2983 · Description: Fair employee compensation · 2986 · Description: Migrant/foreign labor · 2987 · Description: Child labor · 2989 · Description: Non-discrimination2,024
There are no labor complaints or 0 cases.
2,024
There are no labor complaints or 0 cases.

Employees — Performance & Outcomes

Has Performance Results

Yes

Performance Description

• In 2024, there were 163 employee training courses, or an average of 12.29 hours per person, with an average training cost of 3,256.59 baht per person, and 112.48 percent of all employees received training.

• Fair and appropriate compensation for employees by setting performance criteria based on the company's core value competency, with job grades used to assess employee capabilities (Personal Grade) to develop potential, set career growth goals, and adjust appropriate compensation based on the company's performance. The assessment criteria and weights are: Managerial Comperency, Functional Competency, and performance according to set goals.

• Zero accidents resulting in work stoppages. In 2024, there were 2 accidents involving employees resulting in work stoppages, while contractors and business partners who worked within the company had no accidents. The company has reviewed all accident risks, set protective measures, and reviewed safe work procedures. With continuous monitoring according to the ISO-45001 system to control risks at an acceptable level, including recommendations from the Occupational Safety Committee to jointly propose safe work measures.

• The employee injury frequency rate (I.F.R.) must not exceed 2.5 cases per 1,000,000 working hours (I.F.R. is the tendency of accidents that cause injuries and require work stoppage every one million working hours). In 2024, I.F.R. was 9.03 cases.

• The employee accident severity rate (I.S.R.) must not exceed 1.5 days. In 2024, I.S.R. was 84.88 days. The cause of the high I.S.R. was due to an accident from unsafe practices in QC work from moving a tank to inspect the top of the tank, causing an arm sprain and tendonitis. Work must be stopped for several days and an arm cast must be worn. A safe working method requires using a ladder to inspect. There were no accidents with contractors or business partners who came to work in the company's area (I.S.R. means lost days due to injuries, totaling 1 million working hours).

• In 2024, the company had no significant disputes with stakeholders, including the directors. There was no news, no cases of being fined, accused or having civil and criminal actions by regulatory agencies, and no cases of wrongdoing due to ethical issues that violate the law, which are serious offenses, considered by regulatory agencies.

Customers — Plan & Guidelines

Has a Customer Management Plan

Yes

Plan Description

1. Customer satisfaction with the use of products or services must not be less than 80 percent, which is in line with the set target. In 2024, the average customer satisfaction score was 89.84 percent, which was in line with the set target. The company has used customer suggestions to improve and develop in order to create opportunities for competition and satisfaction with products and services. The company has set 5 assessment topics as follows:

• Product satisfaction, with a satisfaction score of 91.00 percent, with suggestions including maintaining the quality of this product and developing it to be even better. The product information in the catalog should be updated to match the current model. There should be additional post-work evaluations for customers to improve/increase the system's performance potential.

• Price satisfaction, with a satisfaction score of 84.00 percent, with suggestions including the price being appropriate for the quality of the product, wanting special prices or adjusting prices for contractors, wanting to add more solar panel brands, and wanting a faster bidding period.

• Delivery and installation satisfaction, with a satisfaction score of 90.80 percent, with suggestions including equipment for pump transport to prevent damage and inspection to reduce errors in transport.

• Service satisfaction, with a satisfaction score of 91.40 percent. Suggestions include: Technical team is attentive in solving problems and following up on work very well. Good service. Would like to add a service team to provide technical information. Tsurumi pump Overall customer satisfaction in using products and services has a satisfaction score of 92.00 percent.

• Overall customer satisfaction in using products and services has a satisfaction score of 92.00 percent.

2. Review and assess the risk of quality work processes of each unit every quarter and have an internal monitoring process continuously. The system has been certified with ISO-9001 standards from TUV NORD (Thailand) Ltd.

Plan Areas

Plan Area
Responsible production and services for customers
Communication of product and service impacts to customers/consumers
Development of customer satisfaction and customer relationship
Protection of customer personal information

Customers — Satisfaction Results

Customer Satisfaction Results

MetricCurrent YearPrevious YearTwo Years Ago
Evaluation results of customer satisfaction111

Customers — Targets

Has Set Customer Targets

Yes

Targets

IndicatorTarget AreasBase YearBase Year — DescriptionTarget YearTarget Year — Description
Customer satisfaction3009 · Description: Development of customer satisfaction and customer relationship2,023
Customer satisfaction with product or service use must not be less than 80 percent.
2,024
Customer satisfaction with product or service use must not be less than 80 percent.

Customers — Performance & Outcomes

Has Performance Results

Yes

Performance Description

Customer satisfaction with the use of products or services must not be less than 80 percent, which is in line with the set target. In 2024, the average customer satisfaction score was 89.84 percent, which was in line with the set target. The company has taken customer suggestions to improve and develop in order to create opportunities for competition and satisfaction with products and services. The company has set 5 assessment topics as follows:

• Product satisfaction, with a satisfaction score of 91.00 percent, with suggestions including maintaining the quality of products like this and developing them to be even better. The product information in the catalog should be updated to match the current model. There should be additional post-work evaluations for customers to improve/increase the system's performance potential.

• Price satisfaction, with a satisfaction score of 84.00 percent, with suggestions including the price being appropriate for the quality of the product, wanting special prices or adjusting prices for contractors, wanting to add more solar panel brands, and wanting a faster bidding period.

• Delivery and installation satisfaction, with a satisfaction score of 90.80 percent, with suggestions including equipment for pump transport to prevent damage and inspection to reduce errors in transport.

• Service satisfaction, with a satisfaction score of 91.40 percent. Suggestions include: Technical team is attentive in solving problems and following up on work very well. Good service. Would like to add a service team to provide technical information. Tsurumi pump

• Overall customer satisfaction in using products and services, satisfaction score of 92.00 percent.

Community & Social — Plan & Guidelines

Has a Community & Social Plan

Yes

Plan Description

• The Company’s vision, "We are committed to conducting a business in environmental conservation that upholds good governance, ensuring sustainable shared success for our business, employees, and society."reflects its commitment to achieving success through the shared sustainability of society, the organization, and its employees. In 2024, the Company organized PREMIER WAY activities to help employees better understand how its business operations contribute to environmental and social responsibility. These activities covered the water management, environmental conservation materials and equipment, and clean energy product groups, which are continuously enhanced to address environmental challenges. Additionally, the Company shares wastewater management knowledge with the industrial and community sectors, promoting a better understanding of wastewater treatment before discharge into public waterways. Beyond environmental stewardship, the Company dedicates 5 percent of its net profit to supporting society through various foundations and remains actively involved in community development around its operational sites.

• The Company fosters community participation around its Kabinburi factory in Kabinburi District, Prachinburi, in alignment with social responsibility standards, which encompass seven key areas: organizational governance, labor practices, environmental stewardship, human rights, fair operating practices, consumer issues, and community engagement and development. As part of its commitment, the Company supports the local economy around its sites by employing community members, contracting local employee shuttle and goods delivery services, outsourcing work to local businesses, and actively participating in community activities. Examples of these initiatives include Buddhist Lent candle offerings, Kathina ceremonies at community temples, reforestation projects, Children’s Day events, scholarship programs for students, and the donation of water storage and treatment tanks for public use.

• The Company invited network partners to participate in the “Save Ozone Save Earth” (Pun Pun Rak) cycling activity on November 16, 2024, to support Na Di Hospital in Na Di District, Prachinburi. As part of the initiative, Pun Pun Rak Cycling Project T-shirts were sold, with all proceeds used to purchase essential items for donation to the hospital.

• The Company supported the National Park Protection Unit of Khao Yai National Park in Na Di District, Prachinburi, by donating three 2,500-liter water storage tanks for use in restrooms serving tourists visiting for rafting activities. The donation took place on November 16, 2024.

• The Company and its employees collaborated to provide aid, including essential consumer goods, to flood victims in Chiang Rai. After the floodwaters receded, they also donated four 2,500-liter water storage tanks through the Mirror Foundation to support cleaning efforts for the homes of those affected.

• The Company invited employees and businesses within the Kabinburi Industrial Estate to donate unused items such as clothing, bags, shoes, children’s items, and home decorations for resale through the “Pun Kan Kabinburi Industrial Estate Project.” The proceeds were converted into scholarships for Yuvabhadana scholarship students in Kabinburi and Na Di Districts. In 2024, a total of five scholarships were awarded as follows:

- Triamudomsuksa nomklao Kabinburi School: Four ongoing scholarships for students in grades 9-12, each valued at 21,000 Baht, totaling 84,000 Baht.

- Ban Hin Thoen School: One ongoing scholarship for a student in grades 7-12, totaling 42,000 Baht.

• Happiness from having morality and ethics towards oneself and others. The company encourages employees to continuously participate in local traditional activities.

Plan Areas

Plan Area
Employment and professional skill development
Education
Religion and culture
Forests and natural resources
Disadvantaged and vulnerable groups
Water and sanitation management
Reducing inequality and promoting social equality

Community & Social — Targets

Has Set Community & Social Targets

Yes

Targets

IndicatorTarget AreasBase YearBase Year — DescriptionTarget YearTarget Year — Description
Reduce the cost of producing community water3043 · Description: Water and sanitation management · 3045 · Other name: Reduce the cost of producing community water · Description: Others2,023
There is an electricity cost for producing community water of 20,000 baht/month.
2,024
Reduce electricity costs for community water production by 25 percent or a reduction of 5,000 baht/month.

Community & Social — Performance & Outcomes

Has Performance Results

Yes

Performance Description

Solar-Powered Community Water Supply Project: The Company engaged in discussions with community leaders and residents of Ban Khlong Chumphon, Na Di District, Prachinburi, located three kilometers from the Kabinburi factory, to understand their expectations and assess both the direct and indirect impacts of the Company’s operations, including potential future effects. The dialogue revealed no negative impacts from the Company on the community. However, the community expressed a need for solar energy expertise, as they faced high water production costs, leaving insufficient funds for maintaining and repairing their water supply system after covering operating expenses. Their water supply system incurred high monthly electricity costs, leading them to seek the Company’s guidance on implementing solar power to reduce energy expenses. Leveraging its expertise and business capabilities, the Company provided technical knowledge and supported the installation of a solar cell system for the Khlong Chumphon village water supply system. This initiative resulted in monthly electricity savings of 4,500 – 5,000 baht, allowing the community to allocate funds for system improvements and maintenance. The Company officially handed over the system to the community in a dedicated event on November 16, 2024.

Other Social Management

Plan & Outcomes — Description

Education: The Company invited employees and businesses within the Kabinburi Industrial Estate to donate unused items such as clothing, bags, shoes, children’s items, and home decorations for resale through the “Pun Kan Kabinburi Industrial Estate Project.” The proceeds were converted into scholarships for Yuvabhadana scholarship students in Kabinburi and Na Di Districts. In 2024, a total of five scholarships were awarded as follows:

• Triamudomsuksa nomklao Kabinburi School: Four ongoing scholarships for students in grades 9-12, each valued at 21,000 Baht, totaling 84,000 Baht.

• Ban Hin Thoen School: One ongoing scholarship for a student in grades 7-12, totaling 42,000 Baht.

Law Violation Incidents

Law Violation Incidents

MetricCurrent YearPrevious YearTwo Years Ago
The total number of cases or incidents of significant violations of laws or regulations regarding social and human rights (Cases)000
The total number of cases or incidents that cause significant labor disputes (Cases)000
The total number of cases or complaints related to consumer rights violations (Cases)000
The total number of cases or complaints related to partner rights violations (Cases)000
The total number of cases or incidents that cause disputes with the community/society (Cases)000
The total number of cases or incidents related to cyber security or customer data breaches (Cases)000
The total number of cases or incidents related to safety and occupational health at work (Cases)000
Contents